RASWNIS - 15mm Radius arm spacers
Suits Nissan Patrol GQ & GU
Radius arm spacers are used on the front radius arms when clearance is required between the tyre and the guard, normally because larger tyres have been fitted, When you lift the suspension the front diff also rolls back, making this cleareance issue more obvious, increasing the need for these washers.
Roadsafe 4WD manufacture their own Radius arm spacers, and build them to the highest standard. Being one of the largest 4wd automotive parts wholesaler's in Australia they need to ensure their product is a cut above the rest.
Some features of their Panhard rods are...
Clearances should be checked when fitting to make sure the panhard clears the diff on full compression, normally ok unless other mods have been done also.
This is a good time to replace the bushes at the chassis end, the arms take a couple of hours to take in & out, so you dont want to be doing it to often. We have a full range of Genuine bushes in stock.
Full range of suspension parts, kits & components availabile in our store, or email us for anything you may need.


Shipping Weight 0.7600kg
Shipping Width 0.170m
Shipping Height 0.030m
Shipping Length 0.120m
Shipping Cubic 0.000612000m3
Assembled Length 17.000m
Assembled Height 4.000m
Assembled Width 11.000m


Be The First To Review This Product!

Help other Smithies Outback Gear users shop smarter by writing reviews for products you have purchased.

Write a product review

We Also Recommend

You May Also Like

More From This Category